Sveabot M100E — Ride-On & Autonomous Floor Scrubber
SVEABOT M100E
Autonomous Cleaning for Large-Scale Operations.
Why M100E?
A ride-on scrubber that also drives itself — the M100E maps your facility with 3D LiDAR and switches to full autonomy once the route is set, covering large, complex floors without a hand on the wheel the whole way.
- Switches between ride-on and fully autonomous modes
- Self-docking auto-recharge — returns and resumes on its own
- Remembers cleaning paths for a consistent clean every time
- Blind-spot detection and a rear-view camera for ride-on mode
Ride it, or let it drive itself
Switch between ride-on and autonomous cleaning in seconds — cover ground fast with an operator, or hand it off entirely once the route's mapped.
Learns the route once
Real footage — drive the route once and the M100E remembers it, then retraces the same path on every run after that. The floor gets the same clean whoever's on shift.
Two brushes, one squeegee, no residue
Twin 406mm disk brushes spin at 200rpm with 3 adjustable pressure levels, while the suction squeegee pulls the water back up — dry floors behind it, every pass.
Docks and charges itself
When the battery runs low, the M100E finds its own way back to the charging station and returns to work once it's topped up.
Built for large facilities
A 120L fresh water tank and 140L wastewater tank mean it can scrub up to 12,000m² before it needs a refill — a full shift on most floors.
Sees what's coming
3D LiDAR, 4 depth cameras, 2D LiDAR, and ultrasonic sensors work together — real footage of the M100E spotting and routing around obstacles.
Nothing sneaks up on it
Blind-spot detection, a rear-view camera for ride-on mode, and obstacle avoidance that reacts to people and objects moving through its path.
Build
- Dimensions
- 1715 × 1120 × 1475mm
- Weight
- 318kg
- Noise
- <75dB
- IP Rating
- IPX3
- Driving mode
- Two rear-wheel drive
- Max speed
- 6.5 km/h
- Gradeability
- 15° (26%), max slope 33°
- Turning radius
- 1,211mm
Navigation & Safety
- Navigation
- 3D LiDAR + 2D LiDAR + 4 depth cameras + ultrasonic sensors + infrared
- Safety systems
- Collision-detection edge, anti-fall cliff detection, emergency stop, blind-spot detection, rear-view camera
Cleaning
- Cleaning width
- 860mm
- Coverage
- 1,238m²/h (auto) · 5,590m²/h (manual)
- Fresh water tank
- 120L
- Waste water tank
- 140L
- Detergent tank
- 5L
Disk Brushes
- Type
- Double disk brushes, 406mm
- Brush speed
- 200rpm
- Down pressure
- 30 / 40 / 50kg (3 levels)
Battery
- Type
- Lithium-ion, 4032Wh
- Charge time
- 4.5 hours
- Battery life
- 3.5 hours
Connectivity
- Connectivity
- Remote control, IoT, 4G, OTA updates, wireless connectivity
Frequently Asked Questions
Looking for an autonomous floor scrubber for large commercial or industrial facilities? Below are answers to the most common questions about the Sveabot M100E, including its cleaning performance, autonomous navigation, deployment, maintenance and commercial applications.
The Sveabot M100E is a commercial autonomous floor scrubber designed for large-scale floor cleaning in demanding environments. Unlike conventional ride-on scrubbers, the M100E can operate autonomously or manually, allowing businesses to switch between unmanned cleaning and operator-controlled cleaning whenever required. Combining intelligent navigation, powerful scrubbing performance and digital fleet management, the M100E helps improve cleaning consistency, productivity and operational efficiency.
Traditional ride-on scrubbers require an operator throughout every cleaning task. The Sveabot M100E offers both autonomous and manual ride-on modes, allowing routine cleaning to be completed automatically while giving operators the flexibility to manually clean complex or high-traffic areas when necessary. This dual-mode capability helps businesses maximise equipment utilisation while reducing repetitive manual labour.
The Sveabot M100E is ideal for large commercial and industrial environments, including:
- Warehouses
- Manufacturing facilities
- Distribution centres
- Shopping malls
- Airports
- Public transport terminals
- Office buildings
- Supermarkets
- Parking facilities
- Exhibition halls
- Hospitals
- Hotels
- Educational campuses
Its large cleaning capacity makes it particularly suitable for facilities requiring frequent cleaning across expansive floor areas.
Yes. The Sveabot M100E is designed to operate in both indoor and suitable outdoor environments. It performs effectively in warehouses, factory workshops, loading areas, parking facilities, covered outdoor spaces and commercial walkways, providing businesses with greater flexibility than conventional indoor-only floor scrubbers.
The Sveabot M100E combines advanced 3D LiDAR, 2D LiDAR, four depth cameras and ultrasonic sensors to build highly accurate maps of its surroundings. It continuously detects walls, equipment, pedestrians and moving obstacles, allowing it to plan efficient cleaning routes while maintaining safe operation in busy commercial environments.
Yes. The M100E continuously monitors its surroundings using multiple sensors and intelligent obstacle detection technology. It automatically slows down, reroutes or stops when necessary to safely navigate around pedestrians, forklifts, pallet jacks and other moving equipment commonly found in warehouses and industrial facilities.
The Sveabot M100E is designed for high-efficiency cleaning in large facilities. With an 860 mm cleaning width, large clean and dirty water tanks and efficient route planning, it can clean up to approximately 12,000 square metres on a single water refill, making it suitable for extensive commercial cleaning operations.
The Sveabot M100E is suitable for most commercial hard floor surfaces, including:
- Epoxy flooring
- Polished concrete
- Ceramic tiles
- Vinyl flooring
- Granite
- Marble
- Terrazzo
- Sealed concrete
Its adjustable brush pressure allows businesses to optimise cleaning performance based on floor conditions and levels of dirt.
Yes. The M100E provides multiple brush pressure settings and intelligent water management, allowing operators to adjust cleaning intensity according to different floor types and contamination levels. This helps improve cleaning efficiency while reducing unnecessary water and detergent consumption.
Yes. The M100E automatically returns to its charging station when required, helping ensure the robot is ready for its next scheduled cleaning task with minimal operator intervention.
Yes. Cleaning schedules, cleaning routes and operating times can be customised according to your facility's operational requirements. Businesses can automate routine cleaning during operating hours, overnight or during off-peak periods to maximise productivity.
No. Once deployed and configured, the robot operates autonomously for scheduled cleaning tasks. Staff only need to perform routine maintenance such as refilling clean water, emptying wastewater, inspecting brushes and monitoring overall operation, allowing cleaning personnel to focus on higher-value responsibilities.
Amrich Technologies provides complete deployment services, including site assessment, delivery, installation, facility mapping, route optimisation, commissioning and operator training. Our engineers ensure the robot is fully configured and ready for daily operation before project handover.
Yes. Every deployment includes comprehensive operator training covering autonomous operation, manual operation, scheduling, daily maintenance, safety procedures and basic troubleshooting. Most users can confidently operate the robot after a short training session.
Routine maintenance includes cleaning the brushes and squeegee, refilling clean water, emptying the recovery tank, inspecting wear components and cleaning the navigation sensors. Amrich Technologies also provides preventive maintenance, software updates, spare parts supply, remote technical support, on-site servicing and Annual Maintenance Contracts (AMC) to maximise long-term reliability.
The Sveabot M100E comes with a one-year warranty covering manufacturing defects under normal operating conditions. Amrich Technologies also provides ongoing technical support, preventive maintenance programmes and spare parts availability to help maximise equipment uptime.
Yes. By automating repetitive floor scrubbing tasks, the M100E helps businesses improve labour productivity, deliver more consistent cleaning quality and optimise cleaning operations. Staff can focus on detailed cleaning, inspections and customer-facing responsibilities while the robot performs routine floor scrubbing autonomously.
The Sveabot M100E combines autonomous navigation, manual ride-on flexibility, intelligent obstacle avoidance and digital fleet management into a single machine. This allows businesses to improve operational efficiency, reduce repetitive manual work and maintain consistently high cleaning standards across large facilities.
Choosing the right robot is only part of the solution. Amrich Technologies provides end-to-end project support, including consultation, site assessment, delivery, installation, mapping, commissioning, operator training, preventive maintenance, remote technical support, on-site servicing, spare parts supply and Annual Maintenance Contracts. Our goal is to ensure every customer achieves long-term success with autonomous cleaning technology.
Key benefits include:
- Autonomous and manual ride-on operation
- Large-scale commercial floor scrubbing
- Intelligent 3D LiDAR navigation
- Advanced obstacle detection and avoidance
- High-capacity clean and wastewater tanks
- Wide 860 mm cleaning path
- Powerful suction for effective water recovery
- Automatic charging capability
- Suitable for large indoor and outdoor commercial environments
- Professional deployment, training and after-sales support from Amrich Technologies
Is the M100E right for your facility?
Tell us about your floor plan and cleaning routine and we'll help you figure out if it's the right fit.
Talk to Us